---------------------- multipart/alternative attachment Just because the underlevers align with the key end lifter felt don't assume that the action is in the correct position. Perhaps both the action and underlevers need to move to the right. Jon Page At 11:29 PM 10/16/2001 +0200, you wrote: >Well lets see.. weve been through most of it with this.. > >checks... >hammer knuckle align with whippens >whippen cushions with capstans >keyends with damper levers. > >Somethings gota move over to the right. Perhaps a combination of things. Look >at what clearances you have and do what you have to. I would love hearing >what you end up with on this one. > >Good Luck > >-- >Richard Brekne >RPT, N.P.T.F. >Bergen, Norway >mailto:rbrekne@broadpark.no ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f0/4b/03/d7/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC