---------------------- multipart/alternative attachment At 05:53 PM 10/16/2001 -0400, you wrote: > I also don't understand why adding a strip of sandpaper, felt, or > whatever >to the rail, is supposed to move the hammers to the right. This would affect >all sides of the flange equally, no? Adding a strip of abrasive paper to the rail would allow the flange to be secured in a position other than where it 'wants' to be due to the profile of the molding. The problem would not be present if it were not for those accursed Tubular Action Rails. Tradition is a terible thing to waste, Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage2001@mediaone.net http://www.stanwoodpiano.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d2/d2/e1/01/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC