Richard, Check to see how much the key pins of the offending notes are sticking into the front bushing. If more than 5mm, see if driving them in a little further won't cure the noise. That's my best guess. Tom Cole Richard Brekne wrote: > > List > > Ok... perhaps someone is going to nail this one right away... but it > took me a bit to figure out. Still I got it in the end... > > I was setting key dip today on my favorite Grotrian, been meaning to get > around to this for a while as the dip was waaay to shallow and had > caused some regulation creativity problems. (around 9.0 mm, perhaps even > a bit less). Anways I roughed em in around 10 mm zip and started doing a > few checks and right at the break between tenor and treble I ran into a > couple black keys that made this really loud clacking sound when played > hard. > > So you tell me.... what was the problem and solution ! > > -- > Richard Brekne > RPT, N.P.T.F. > Bergen, Norway > mailto:rbrekne@broadpark.no
This PTG archive page provided courtesy of Moy Piano Service, LLC