---------------------- multipart/alternative attachment In a message dated 9/5/01 11:52:46 PM Central Daylight Time, MBrat70179@AOL.COM writes: > In the past I have tried shimming the keyframe with front rail punchings. You are using the front rail punchings in the wrong place. Instead of between the rail and the action, cut them in half, and put them over the screw holes, between the rail and the keybed, but on the action side of the hole. When you tighten the screw, the top of the rail will move away from the keys. Willem ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/61/fa/14/c1/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC