I am intrigued by the suspended drill press. Have you seen this Jeannie? Any details? I need to make a jig of some sort to drill a block in a piano. Maybe this is a good way to go. Anyone else ever used anything like this? Any thoughts? Terry Farrell ----- Original Message ----- From: "Jeannie Grassi" <jgrassi@silverlink.net> To: <pianotech@ptg.org> Sent: Monday, April 01, 2002 11:30 AM Subject: RE: drilling pinblock > Ron, Ric, > This is a super shop, not far from here, and they do top-notch work! > > jeannie > -----Original Message----- > From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of > Richard Brekne > Sent: Monday, April 01, 2002 6:33 AM > To: pianotech@ptg.org > Subject: Re: drilling pinblock > > > Ron Nossaman wrote: > I thought this was fun. > http://www.pianoman.bc.ca/pin_block_drilling.JPG > > Ron N > > > For more pictures from this place visit > > http://www.pianoman.bc.ca/shopPictures.htm > > -- > Richard Brekne > RPT, N.P.T.F. > Bergen, Norway > mailto:rbrekne@broadpark.no > http://home.broadpark.no/~rbrekne/ricmain.html > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC