That questions depends heavily on the amount of money you are willing to spend. When it comes to air guns nothing is better than BINKS. A good one with a nozzle specifically for laquer cost around 250 dollars. I would not go cheap on the air gun as it will have a huge effect on the quality of your finish. As far as compressors go, you need at least 100+ per square inch of pressure so that you can use it for air tools excetera. Also if going portable you want a double tank so that you do not get a drop in air pressure in the middle of a spray job. Crafstman makes great low end portable compressors. Home Depot has a line but the small ones are iffy. However the large versions of the Campbells are pretty good. --- "Those of us who dance appear insane to those who can't hear the music." George Carlin "I am prepared to meet my maker. Whether my maker is prepared for the great ordeal of meeting me, is another matter." Winston Churchhill. On Wed, 10 Apr 2002 12:52:52 Wayne Hohle wrote: >hi list >if you were going to buy a compressor and gun, what would you get. >how big a compressor etc >thanks >wayne > > See Dave Matthews Band live or win a signed guitar http://r.lycos.com/r/bmgfly_mail_dmb/http://win.ipromotions.com/lycos_020201/splash.asp
This PTG archive page provided courtesy of Moy Piano Service, LLC