In a message dated 4/23/02 4:39:45 PM Eastern Daylight Time, cedel@supernet.com writes: << simply punch the old liftrod hook remnant out. >> Sure you can. It was just polished smooth and plated over. No match for a big hammer. If you can"t make a new hanger you"ll have to order it. In the meantime a quick temporary fix could involve a brass hinge pin cut and bent to the right size and superglued in place. The hanger bracket can be temprarily substituted by a small easily modified low water warning light wire mount that you probably have a hundred of already.
This PTG archive page provided courtesy of Moy Piano Service, LLC