---------------------- multipart/alternative attachment In a message dated 08/04/2002 1:08:04 PM Eastern Daylight Time, avery@ev1.net writes: > But how do you get the lengths correct without a lot of waste or coming > up short? Especially from the middle on down. > Avery, You can measure each one if you like.I have found that it's easier, that if you need 5 sizes of one wire,to cut them all the same as the longest one.It's so much easier,faster,and far out-weighs the small amount of waste.That way you have one tool in hand for a task,instead of constantly changing from cuting, to stringing. Best, Hazen Bannister ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20/1d/17/69/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC