Stanwood has published a series of articles in the PTJ over the years that define his terms and procedures. When you purchase his platform for taking measurements (available from www.pianoteksupply.com) you also get a sheet of info defining terms and formulas and outlining procedures for taking measurements. David Love ----- Original Message ----- From: "Scott Jackson" <jurjens@tpg.com.au> To: <pianotech@ptg.org> Sent: August 15, 2002 5:21 AM Subject: Re: Key Ratios Is all 'Stanwood' terminology public knowledge? Scott Jackson Jurjens Pianos Wollongong Australia ----- Original Message ----- From: "Joseph Garrett" <joegarrett@earthlink.net> To: <pianotech@ptg.org> Sent: Thursday, 15 August 2002 10:19 Subject: Key Ratios | David Love, | Thank you for the explanation. I pretty much understood the terminology, but | was concerned that, possibly, others would not. There are many who are not | conversant with all of David Stanwood's theorems, terminology, etc. | Best Regards | Joe Garrett, RPT, (Oregon) | | I'm never lost, because everyone is telling me where to go. <G> |
This PTG archive page provided courtesy of Moy Piano Service, LLC