This is a multipart message in MIME format ---------------------- multipart/alternative attachment Roger, You had an article on steaming in a recent Journal, right? I'm considering trying it on a 1 year old Yamaha G2 that has already begun breaking strings in the treble....hotel lounge with big bands and probably no monitor for the piano... David I. ----- Original message ----------------------------------------> From: jolly roger <baldyam@sk.sympatico.ca> To: <pianotech@ptg.org> Received: Fri, 23 Aug 2002 00:28:02 -0500 Subject: Re: Singing Samick 3. Anything else to try? (Bridge and everything else 'looks' fine.) Alan Barnard Hi Alan, Try tapping the bridge pins, they are probably are probably loose. Use a hammer shank or a pin set punch, just be careful with the hammer. The rock hard hammers need deep needling on the shoulders, or a generous dose of steam. if you are inexperienced at voicing, find some one to help you. Regards Roger ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8d/53/13/95/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC