That's silly Ron, and misses the point. I am going to remove all the keys from each rebuild I do in the future to prevent future pinblock failure - because every piano that I have replaced a pinblock on had KEYS! THAT has got to be it! Terry Farrell ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: <pianotech@ptg.org> Sent: Wednesday, August 28, 2002 10:56 PM Subject: Re: Tuning Pin Length? > > > > >As I firmly believe that a completely sealed pinblock will last longer, this > >is how I do it. (99% of the pinblocks I've had to replace were drilled all > >the way through.) > >Best Regards, > >Joe Garrett, RPT, (Oregon) > > About that percentage of the grands I've rebuilt have had three legs too. > This has to mean something. > > Ron N >
This PTG archive page provided courtesy of Moy Piano Service, LLC