pinblock separation

[Bigeartb@AOL.COM]

---------------------- multipart/alternative attachment
Bill:
Your are correct. I had a senior moment. The bolts I use are 3/8" instead of 
3/16".
Bill ......Glassing the Block.....In the past I have used a paste filberglass 
to "glass the block". Is this acceptable practice? Also.....what size 
drillbit do you recommend when drilling a new pinblock for 2/0 pins and where 
do you purchase these bits. My ole buddy who is now in "happy hunting ground" 
told me to use l/4" honed down with India stone .007 less than 1/4" but I'm 
sure someone sells such animals now. I try not to rebuild if possible but am 
about to get back into it and need to purchase a drill bit.

Thank you 
Tommy Black
Birmingham, Ala. Chapter

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a0/c6/a8/91/attachment.htm

---------------------- multipart/alternative attachment--