Epoxy

[Carl Meyer]

Ron,  You may be right approximately.  Is the centipoise scale linear?  I
sure don't know.  I'm not sure I know anything anymore.

Since your showing off your math skills, look at the website   for viscosity
and tell me how centipoise and centistokes are related.  Or Reynold units
for that matter.  I'm curious but my math skills have deteriorated (maybe
it's my enthusiasm) to the point I can't justify  the time to be reeducated.
Thanks!

Carl Meyer  Assoc. PTG
Santa Clara, California
cmpiano@attbi.com

----- Original Message -----
From: "Ron Nossaman" <RNossaman@KSCABLE.com>
To: <pianotech@ptg.org>
Sent: Sunday, January 06, 2002 12:05 PM
Subject: Re: Epoxy


>
> >
> > I've just learned that clear coat has a viscosity of approx. 600 for the
> resin
> > and about 200 for the hardener.  I'm not sure how the mix relates but it
> > should be about 500 since the mix ratio is 2-1.
> >
> > Happy gluing.
> >
> > Carl Meyer  Assoc. PTG
>
>
> How does that work - average? (6c+6c+2c)/3 = 466.666666666666666, or
> thereabouts.
>
> Ron N
>