Richard, you put the threaded rods down between the strings. Only if the soundboard is 6 inches below the strings will you have trouble. The bridge can't be that high. Carl Meyer Assoc. PTG Santa Clara, California cmpiano@attbi.com ----- Original Message ----- From: "Richard Brekne" <Richard.Brekne@grieg.uib.no> To: <pianotech@ptg.org> Sent: Wednesday, January 09, 2002 2:33 PM Subject: Re: Broads > Carl Meyer wrote: > > > Richard!!!! You do realize I meant to check the crown from the top. I hate > > to get down under the piano. There might be ghosts down there. > > > > Carl Meyer Assoc. PTG > > Santa Clara, California > > cmpiano@attbi.com > > > > --- > > Ah yes... but there is only about 3/4 inch between the strings and panel.. still > a little modification and I might come up with something along those lines. :) > > > Richard Brekne > RPT, N.P.T.F. > Bergen, Norway > mailto:rbrekne@broadpark.no > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC