Una Corda Problem in Seiler Grand

[Newton Hunt]

> The problem is now to find out how to get paid for it....:-)   

Measure the height of the tongue above the keybed and measure the depth of the
slot and the height of the keyframe above the bed and submit those measurements
to the paying party.  Use a straight edge spanning the keyframe front to back
and measure the depth at the engagement point.  Using these measurements you
will know how much to cut off the blocks.  You need full engagement but not
enough to lift the keyframe.

You will not get paid for all your time on this one, minimum three trips, but
you will gain a customer with a nice piano.

		Newton