vertical action cradles

[Ron Nossaman]

>    I think you're right, Mike.  The compression fitting system of
>connecting the legs IS a superior method, I'm just not sure how you would
>ascertain that design will be what you order.  I guess just ask the order
>taker and be prepared for a non-answer or be put on hold for awhile until
>someone actually looks at it.  Mike Kurta, RPT

I've seen two types of leg mount, one compression, the other a set screw,
both conduit fittings and available at a local hardware store cheap. You
should be able to just swap out the set screw fittings for compression,
shouldn't you?
Or are there traps I'm unaware of?

Ron N