John On highly figured veneers try a smaller burr on your scraperand a more vertical angle when working the surface. Paul Chick ----- Original Message ----- From: "Jon Page" <jonpage@attbi.com> To: <pianotech@ptg.org> Sent: Tuesday, June 04, 2002 5:49 AM Subject: Re: Water-Base Laquer > However, on highly figured surfaces a liquid remover is necessary. > Regards, > > Jon Page, piano technician > Harwich Port, Cape Cod, Mass. > mailto:jonpage@attbi.com > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >
This PTG archive page provided courtesy of Moy Piano Service, LLC