---------------------- multipart/alternative attachment At 12:19 AM 6/6/2002 -0400, you wrote: >Hi, >Do you guys use burlap cloth to rub in the grain filler ?,it works great. >Best, >Hazen Bannister A water based filler is easier to use; just trowel it on, let it dry for a few hours and sand. A mist coat of sealer on the wood prior to filling will reduce drag and it will apply quicker. The sealer is then sanded off as the filler is sanded. If you are real bold, stain first but be careful to stop sanding at the sealer to prevent sanding off the stain in areas. After removing the finish, sand everything with 100. Fill. Sand with 180 To fill finer pores, thin the filler and reapply. Sand with 320. This and others procedures will be covered in a series of articles by David Koelzer and myself. Now, where's that ambition... it's around here somewhere... Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@attbi.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ce/21/4f/61/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC