Jon, Maybe that was my problem although i thought i did a pretty good job of cleaning it first. I'll try better next time. Greg At 09:34 AM 6/6/2002, you wrote: >At 09:03 AM 6/6/2002 -0400, you wrote: > >The sealer I used also seemed to come out of the pores when I lightly > sand. It there something I can do to prevent all that reapplying? > >Prior to filling the surface must be vacuumed thoroughly to remove the >sanding dust from the pores. >Otherwise, there is nothing for the filler hold onto other that dust. >Regards, > >Jon Page, piano technician >Harwich Port, Cape Cod, Mass. >mailto:jonpage@attbi.com >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Greg Newell mailto:gnewell@ameritech.net
This PTG archive page provided courtesy of Moy Piano Service, LLC