At 12:55 PM 6/6/2002 -0400, you wrote: >Jon, > Maybe that was my problem although i thought i did a pretty good > job of cleaning it first. I'll try better next time. > >Greg The attachment with the round brush (wosset, I think) needs to be placed directly on the surface to insure maximum suction. >At 09:34 AM 6/6/2002, you wrote: >>At 09:03 AM 6/6/2002 -0400, you wrote: >> >The sealer I used also seemed to come out of the pores when I lightly >> sand. It there something I can do to prevent all that reapplying? >> >>Prior to filling the surface must be vacuumed thoroughly to remove the >>sanding dust from the pores. >>Otherwise, there is nothing for the filler hold onto other that dust. >>Regards, >> >>Jon Page, piano technician >>Harwich Port, Cape Cod, Mass. >>mailto:jonpage@attbi.com
This PTG archive page provided courtesy of Moy Piano Service, LLC