----- Original Message ----- From: "D.L. Bullock" <dlbullock@att.net> To: <pianotech@ptg.org> Sent: Sunday, June 09, 2002 4:42 PM Subject: RE: water based finishing > I have read the postings on water based finishes with interest. Years ago > when I last investigated them there was no reason to switch over. After > these years of R&D time, now I am considering them again. I know the > problem with Polyurethane Varnishes is they are so airtight they rot the > wood underneath with gray streaks showing after 5-10 years Is this a > problem with the water based. Everything else noted in this venue seems to > be a plus for the water based products. > > D.L. Bullock > St. Louis Can't speak for other waterbornes, but PianoLac "breathes" sufficiently to allow the film to flex without cracking or greying. Arthur Grudko StarHawk Labs >
This PTG archive page provided courtesy of Moy Piano Service, LLC