Single Strings and bearing

[Delwin D Fandrich]

----- Original Message -----
From: "Jon Page" <jonpage@attbi.com>
To: <pianotech@ptg.org>
Sent: June 17, 2002 4:32 AM
Subject: Re: Single Strings and bearing


>
>
> If you mean the 'tie-off' or twisted portion of an added single plain wire
> will sit on the plate thus raising the wire and reducing the down bearing
then
> by simply installing two unisons each of 18, 19 & 20 will solve the all
concerns
> in regards to like-sized wire on the unisons and downbearing. With no
> alterations done to the plate.



Not in this case it wouldn't.

Del