This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment It's a Wurlitzer console. The moving company is paying and wants an = estimate. The key bed is over an inch thick particle board with birch? = veneer on both sides. The veneer on the bottom is holding the leg on. It = is busted inside obviously, but can be clamped flush easily to the 1/2" = thick oak facia. =20 Will injecting glue or epoxy through the broken area be a decent fix? = Maybe make holes large enough to dowel the injection holes? Is a replacement bed available? The bed has to be removed anyway the repair is done so I figure an hour = to take apart and 2 hours to put back together. Am I allowing enough = time? Everything is in excellent shape, well kept. Thanks Keith R ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/05/68/92/e7/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC