CA glue bottle life

[romanop@attglobal.net]

Clair,

I don't cut the tips either. However, as CA catalyzes with the moisture
content on the surface you are bonding, any moisture on your pipette will
contaminate the glue in the bottle. I always pour a little on to a piece of
foil or whatever first and then use an applicator (pipette, popsicle stick,
etc..).

Phil Romano
Myrtle Beach, SC
----- Original Message -----
From: "Clair Dunn" <cadunn@vt2000.com>
To: <pianotech@ptg.org>
Sent: Tuesday, June 18, 2002 3:44 AM
Subject: CA glue bottle life


> After getting only half or 2/3 value out of CA bottles, I finally
> figured out that if I never cut the nozzle and only remove the whole
> cap for each use, dipping into the bottle with a pipette, I get to
> use the whole bottle up.
> Just be careful not to drip on the threads or you have to use pliers
> to remove the screw top.
> Clair
>
> Clair's Piano Service
> http://www.vt2000.com/cps
>
>
>