CA glue bottle life

[Benny L. Tucker]

    I have this same problem with the CA glue, after using it just a few
times and then throwing it away. The last time I placed an order with
Schaff, I ordered a dozen plastic oilers, "part #186 page 45", for the
exclusive use of applying the glue without cutting the tip of the bottle, as
you suggested. Haven't actually tried it yet, but it looks like it will
work!!

Benny L. Tucker
Yamaha Factory Tuner
Precision Piano Tuning & Repair
Thomaston, Ga.

----- Original Message -----
From: "Clair Dunn" <cadunn@vt2000.com>
To: <pianotech@ptg.org>
Sent: Tuesday, June 18, 2002 3:44 AM
Subject: CA glue bottle life


> After getting only half or 2/3 value out of CA bottles, I finally
> figured out that if I never cut the nozzle and only remove the whole
> cap for each use, dipping into the bottle with a pipette, I get to
> use the whole bottle up.
> Just be careful not to drip on the threads or you have to use pliers
> to remove the screw top.
> Clair
>
> Clair's Piano Service
> http://www.vt2000.com/cps
>
>
>
>