black finish

[Erwinspiano@AOL.COM]

---------------------- multipart/alternative attachment
In a message dated 6/21/2002 5:41:08 PM Pacific Standard Time, 
gutlo@bestweb.net writes:


> Subj:Re: black finish 
> Date:6/21/2002 5:41:08 PM Pacific Standard Time
> From:<A HREF="mailto:gutlo@bestweb.net">gutlo@bestweb.net</A>
> Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
> To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
> Sent from the Internet 
> 
>   Arthur

   They get away with it Because they can. The black lacquer they use is too 
soft and imprints for years. Every black piano has large craters under each 
lid button. It's p[ossible the rubbers outers are simply careless as the the 
material really builds and holds to the edges. it has heavy solids and is 
designed to be  sprayed on at about 140 degrees. It works better that way. 
When I used it we heated it in a crock pot  to about that prior to loading 
the gun.
 I used this material for a while but it has changed again of course.
    Too fussy and too much imprinting.
 >>>>>Dale Erwin>>>>>>>>>>
    

> 
> List,
> Missed the tongue-in-cheek.
> You're right-new Steinways have finish problems right out of the factory.
> Don't know how they get away with it.
> 
> Arthur
> ----- Original Message -----
> From: <Kdivad@AOL.COM>
> To: <pianotech@ptg.org>
> Sent: Friday, June 21, 2002 10:39 AM
> Subject: Re: black finish
> 


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/96/1a/51/6e/attachment.htm

---------------------- multipart/alternative attachment--