----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: <pianotech@ptg.org> Sent: June 24, 2002 4:26 AM Subject: Kelly Plate History > I tuned a Packard old upright recently. Cast into the plate at the bottom was "The Wickham Piano Plate, Springfield, OH." Kelly plate, (or what was Kelly plate until S&S bought it recently) is located in Springfield, OH. Was Wickham a predecessor that evolved into Kelly, or was Springfield simply a hot-bed (so to speak) of plate manufacturers. > > Terry Farrell > Wickham was a separate foundry also located in Springfield. They supplied plate castings of poorer and poorer quality and continually refused to upgrade their facility until ultimately they became uncompetitive and went out of business. Sometime in the 1970s if memory serves. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC