Hi Dave I have also had this experience of very tight pins on just a few models of the uprights.This only was for a short time.Now they are still tighter than what we have considered normal for Yamaha but not snapping tight as we have experienced .The capstan wrench is available from Yamaha. Regards Murray ----- Original Message ----- From: "Dave Doremus" <algiers_piano@bellsouth.net> To: <pianotech@ptg.org> Sent: Tuesday, June 25, 2002 5:18 PM Subject: Yamaha uprights > I've recently had to tune three Georgia made Yamaha uprights with > Baldwin style tight and jumpy pins. I've never felt pins like that in > a Yamaha before. Any one else run into this? Is it a new style or > just sloppy factory work? Also, who makes a capstan wrench for those > hexagonal capstans, none of the ones I have will work. >
This PTG archive page provided courtesy of Moy Piano Service, LLC