In fact they seem to cause problems: If the jack does touch, it can get stuck, wedged in between the rail and the hammer butt! Scott Jackson Australia ----- Original Message ----- From: "Joseph Garrett" <joegarrett@earthlink.net> To: <pianotech@ptg.org> Sent: Monday, March 31, 2003 12:45 PM Subject: Strange action configuration in Sejung > Could someone please enlighten me as to the purpose of Jack Stop Rails. I > hate those things and have been removing them for many years w/o any problem > occuring after the fact. Most that I have removed show absolutely no tracks > or evidence that the jack comes anywhere near it. > Best Regards, > Joe Garrett, RPT, (Oregon) > > Been There, Didn't Like It, So I'm Here To Stay! [G} > >
This PTG archive page provided courtesy of Moy Piano Service, LLC