Dave, But if it comes away "that" far (more than 3/16"), I would think there would be some other problem. I'd think that that would be MORE than enough to keep a hammer from "dithering"! :-) Avery At 09:22 PM 04/08/03 -0600, you wrote: > >I believe some people (Yamaha?) says that the jacks should be about half way > >between the butt and the catcher at full dip! > >Could be, but on the PTG tech. test, if it comes away from the butt more >than 3/16", you lose a point. > --David Nereson, RPT, Denver
This PTG archive page provided courtesy of Moy Piano Service, LLC