---------------------- multipart/mixed attachment Still a great deal slower than heat. Nice alternative if you can't come by some heat say out in the field. Thanks for the tip. Greg Newell At 02:55 PM 4/12/2003, you wrote: > >>THANK YOU, THANK YOU, THANK YOU, Etcetera! Sure beats hand screwing it or >trying to make a chuck for the electric screwdriver!<< > >I would like to suggest my method which does not require a torch (extra >equipment, possible fire and burn hazzard) and is faster. > >Clamp some needlenose vise grips to the wire (tightly), maybe about an inch >above the thread (not critical), grab the non thread end with your left hand >and place an elbow onto the other side with the right hand. Then, using the >weight of the pliers, just start the whole thing spinning and the elbow is >threaded on in about one second. The whole process is about 4 seconds. > >Dave Bunch Greg Newell mailto:gnewell@ameritech.net ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC