No doubt a good point. Although, I'm thinking of rejecting them long before that happens! I think I'm going to set up a couple of these and a couple conventional butt and get the respective springs set so that each one has a touchweight of say 50 grams. Then I'll let it go through its travel real slow and see if there is enough friction to slow anything up at the end of the stroke. Terry Farrell ----- Original Message ----- From: <Lwellerrpt@aol.com> To: <pianotech@ptg.org> Sent: Thursday, April 24, 2003 11:15 AM Subject: Re: Asian Hammer Butt Spring String Friction > Terry- > > Should you also be concerned about that friction shredding the string? > > Lisa > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC