Does anyone have the original of the message below with the jpg attached who can forward it to me. Thanks David Love davidlovepianos@earthlink.net > ----- Original Message ----- > From: "Paul E. Dempsey" <<mailto:dempsey@Marshall.edu>dempsey@Marshall.edu> > To: "Pianotech" <<mailto:pianotech@ptg.org>pianotech@ptg.org> > Sent: February 05, 2003 5:50 AM > Subject: Re: D hammers > > > Ron, > > > > Can you share some details regarding this brace you "routinely" install > > during soundboard replacement? > > > > Thanks > > > > Paul, > > See the photo below. The brace between the inside treble curve and the > belly rail has been added to stiffen the belly rail. We add this brace as a > part of our remanufacturing process. And we usually add the added brace > between the #1 bellybrace and the straight, bass side, of the rim (just > under the terminus of the also added soundboard cutoff bar). > > These braces are installed in a similar fashion to the originals and are > visually identical, i.e., they look original. > > Del > > 150bf1.jpg > >
This PTG archive page provided courtesy of Moy Piano Service, LLC