This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Koenig polyester set for the black polyester are a must. 2 corposants and one tint. can be sanded and rubbed the same day, even a few hours after if you are in a hurry. May be sold by Pianotek ? Isaac OLEG Entretien et reparation de pianos. PianoTech 17 rue de Choisy 94400 VITRY sur SEINE FRANCE tel : 033 01 47 18 06 98 fax : 033 01 47 18 06 90 cell: 06 60 42 58 77 -----Message d'origine----- De : pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]De la part de Piannaman@aol.com Envoye : dimanche 27 avril 2003 06:21 A : pianotech@ptg.org Objet : Re: polyester repair In a message dated 4/26/03 8:16:51 PM Pacific Daylight Time, pianolover88@hotmail.com writes: has anyone on our list done polyester repair? specifically, I have a U1 polished ebony fallboard with a small chip, about the size of your small fingernail, and maybe 3-4 mm deep. would a polyester repair of this size be something I could do myself with the proper materials? Any advice in this matter will be very much appreciated. Terry, Haven't done this myself, but there is a two part article on this in January and February journals. Dave Stahl ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/59/02/37/95/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC