This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I'd say never steam a lacquered hammer unless you like the potatoes (ask me how ....e.t.c) Isaac OLEG Entretien et réparation de pianos. PianoTech 17 rue de Choisy 94400 VITRY sur SEINE FRANCE tel : 033 01 47 18 06 98 fax : 033 01 47 18 06 90 cell: 06 60 42 58 77 -----Message d'origine----- De : pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]De la part de tune4u@earthlink.net Envoyé : dimanche 27 avril 2003 15:15 À : Pianotech Objet : RE: lacquer softener Is the vise grip option really all that extreme? Seems like you're trying to break up some rocks, there. I've never tried it, but what about that long thread that ran here a few months ago about steaming hammers? Alan Barnard Salem, MO -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Dave Nereson Sent: Friday, April 25, 2003 10:06 PM To: pianotech@ptg.org Subject: lacquer softener What can one use to soften hammers that were lacquered at the factory? At first I thought lacquer thinner, but wouldn't that just evaporate and leave them still hard? Tried a voicing needle and broke three of them. The voicing tool just will not go in. Tempted to go to the vise-grips extreme. Surely the wonderful world of chemistry offers some liquid I can drizzle on them. ?? --David Nereson, RPT ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b3/f6/67/37/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC