Electric Hammer Shank Bending Pliers

Farrell mfarrel2@tampabay.rr.com
Mon, 28 Apr 2003 15:10:03 -0400


> "This is the same plier as No. 268 above, except it is electrified."
 Ahhh. Geezzzz. I can't see the forest for the trees. Er, no, I guess I can't see all the trees for the forest! Guess I'll have to up the strength of these darn reading glasses. Thanks.

Terry Farrell
  
----- Original Message ----- 
From: "Ron Nossaman" <RNossaman@cox.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: Monday, April 28, 2003 1:29 PM
Subject: Re: Electric Hammer Shank Bending Pliers


> 
> >I thought I had seen electric hammer shank bending pliers - basically an 
> >electrified version of the pliers on page 49 of the Schaff catalog. Anyone 
> >know where I can find electric ones? Or should I just solder one wire to 
> >each end of the pliers and plug it into the wall?   ;-)
> >
> >Terry Farrell
> 
> 
> How about the ones on page 49, just below the #268? The #121 ones that say 
> "This is the same plier as No. 268 above, except it is electrified."
> 
> Now the next question... why?
> 
> Ron N
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives

This PTG archive page provided courtesy of Moy Piano Service, LLC