Terry, Try contacting Yamaha - Mark Wisner. They have a pair of electric shank bending pliers in their catalogue. Part number is: TX 62 57 00. There is no price listed, but they are probably expensive. At 09:25 AM 4/28/2003 -0400, you wrote: >Thanks. Do you by chance have a web address - all I can find is a website >only in Japanese. Kind of a tough read on my end. > >Terry Farrell > >----- Original Message ----- >From: "Kerry Cooper" <brispiano@optushome.com.au> >To: "Pianotech" <pianotech@ptg.org> >Sent: Monday, April 28, 2003 8:08 AM >Subject: Re: Electric Hammer Shank Bending Pliers > > > > Terry, > > Watanabe Musicial Instrument Co Ltd . Japan > > > > Kerry > > ----- Original Message ----- > > From: "Farrell" <mfarrel2@tampabay.rr.com> > > To: <pianotech@ptg.org> > > Sent: Monday, April 28, 2003 10:03 PM > > Subject: Electric Hammer Shank Bending Pliers > > > > > > > I thought I had seen electric hammer shank bending pliers - basically an > > electrified version of the pliers on page 49 of the Schaff catalog. Anyone > > know where I can find electric ones? Or should I just solder one wire to > > each end of the pliers and plug it into the wall? ;-) > > > > > > Terry Farrell > > > > > > _______________________________________________ > > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC