Fallboard removal/Wesley Hardman

[Wesley Hardman]

Thanks Joe for the reply on the Fallboard Removal.  Wesley Hardman,
Scottsboro, Alabama.
----- Original Message -----
From: "Joseph Garrett" <joegarrett@earthlink.net>
To: <pianotech@ptg.org>
Sent: Friday, August 01, 2003 11:37 PM
Subject: Re: Fallboard removal/Wesley Hardman


> Wesley,
> I bet, if you look at the end(s) of fallboard, at half closed position,
you
> will have your answer.<G> This one had me stumped for over an hour!
> (Admittedly, I felt foolish when I finally found it!) Either that, or the
> stretcher comes off and you access the whole thing with a LOOOONG
> screwdriver.
> What the hell was it with the manufacturers? Did they require Chinese
Puzzle
> Box 101, 102...through 303? Yikes! Are we having fun yet?<G>
> Best Regards,
> Joe Garrett, RPT, (Oregon)
>
> Been There, Didn't Like It, So I'm Here To Stay! [G}
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>