---------------------- multipart/alternative attachment In a message dated 12/6/2003 9:04:59 PM Central Standard Time, cmpiano@comcast.net writes: > > The baldwin system has the following problem. No adjustment after the fact. > All screws must be removed and one screw dimension is the only variation > possible. I like my system. > One of the benefits of using set screws is the ability to adjust after the fact. It is possible to add or remove down bearing on a strung piano. I've done it. Andrew Remillard ANRPiano.com ANR Piano Service 2417 Maple Ave Downers Grove, IL 60515 630-852-5058 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/2b/1a/ed/62/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC