---------------------- multipart/mixed attachment >But now I'm having one helluva time trying to budge these puppies with my= =20 >combination handle key spacing tool. Does anybody make a combination=20 >T-handle? > >Guy Nichols' tool with the T handle sounds like a great idea. > >Dave Stahl Take the tool you already have out to the shop, put it in the vise, and put= =20 a 90=B0, or near 90=B0 bend in it just above the farthest point that it goes= =20 into the combination handle. Bend it parallel to the slot so it points=20 straight up or down (as you wish) with the tool on a front pin. You now=20 have a lever with a combination handle grip for spacing, or leave the=20 handle off for turning. I immediately did that to mine many years ago after= =20 I bought it and fought it once, and it became much more useful after the=20 modification. Ron N ---------------------- multipart/mixed attachment --- Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.551 / Virus Database: 343 - Release Date: 12/11/2003 ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC