I remember from my corporate days that the pins that Baldwin uses were called roll pins. Don't know is that is official or not. Terminology is a moving target. Carl Meyer Ptg assoc Santa Clara, Ca. ----- Original Message ----- From: "Joseph Garrett" <joegarrett@earthlink.net> To: <pianotech@ptg.org> Sent: Wednesday, December 17, 2003 10:18 PM Subject: Re: A Hitch in a Hitchpin/Del > Del said: "Ed, > > I had the same dilemma with a Charles Walter Grand, which has "Spring > Pins" > > for hitch pins. > > No it doesn't. It has groove pins. > > Del > > > Del, > I beg to differ with you. The "groove(d) pins" are known a spring pins. > Reason being is that their primary use is to connect a spring to a fixed > point. I was not referring to the spring steel pins, as in Baldwins! I > believe if you were to type in "spring pin" in your search engine, you would > come up with the same "pin" that you designed into the Walter. Sorry for the > confusion folks. This must be my day for being misread/misunderstood. Damn! > Oh well, Happy Holidays anyway!<G> > Joe Garrett, RPT, (Oregon) > Captain, Tool Police > Squares Are I > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC