gordon stelter wrote: > Well, could one experiment with the diameter and > surface area which actually contacts the heel, or, for > that matter, just make a really WIDE, flat top to > effect the same result? > Thump > True enough.. I have some brass tuning pin bushings I had to remove from an older piano a while back. They might serve well for a little experiementation. Tho again.... me thinks this simply must have been thought of before and ruled out. My inquirey was more based on why this was so then anything else. Cheers RicB -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC