What! You aren't coming to Dallas in "the next day or two"????? dave *********** REPLY SEPARATOR *********** On 7/1/2003 at 5:54 PM Avery Todd wrote: >List/Terry, > >I just installed the new Young Chang action brackets today >and I "think" I'm going to get pretty lucky. No one had >messed with it trying to make it work before I got it, so >it seems like most everything is going to fall right back >into place pretty close. The hammers look a little high >but I now have let-off and drop! :-) > >The existing spread ranged from 114.5 mm to 116.0 mm and it >should be 112.5 on this piano. > >Longer screws were also sent with the brackets, so I didn't >have to go get any and I also didn't have to plug and rebore >any of the front (slanted) holes! > >Haven't taken it back to the piano yet but will in a day >or so, probably. > >Avery > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives **************** END MESSAGE FROM Avery Todd ********************* _____________________________ David M. Porritt dporritt@mail.smu.edu Meadows School of the Arts Southern Methodist University Dallas, TX 75275 _____________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC