Dave, Wish I could and I'd planned on it but I had to spend about $1600.00 on a transmission overhaul a month or so ago and about $300.00 for some radiator work a couple of weeks before that! Sorry. Maybe next year, although it won't be so close to where my sister lives! :-) Enjoy. Avery At 06:25 PM 07/01/03 -0500, you wrote: >What! You aren't coming to Dallas in "the next day or two"????? > >dave > >*********** REPLY SEPARATOR *********** > >On 7/1/2003 at 5:54 PM Avery Todd wrote: > > >List/Terry, > > > >I just installed the new Young Chang action brackets today > >and I "think" I'm going to get pretty lucky. No one had > >messed with it trying to make it work before I got it, so > >it seems like most everything is going to fall right back > >into place pretty close. The hammers look a little high > >but I now have let-off and drop! :-) > > > >The existing spread ranged from 114.5 mm to 116.0 mm and it > >should be 112.5 on this piano. > > > >Longer screws were also sent with the brackets, so I didn't > >have to go get any and I also didn't have to plug and rebore > >any of the front (slanted) holes! > > > >Haven't taken it back to the piano yet but will in a day > >or so, probably. > > > >Avery > > > > > >_______________________________________________ > >pianotech list info: https://www.moypiano.com/resources/#archives > >**************** END MESSAGE FROM Avery Todd ********************* >_____________________________ >David M. Porritt >dporritt@mail.smu.edu >Meadows School of the Arts >Southern Methodist University >Dallas, TX 75275 >_____________________________ > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC