soundboardinstal again

Delwin D Fandrich pianobuilders@olynet.com
Fri, 25 Jul 2003 14:38:57 -0700


----- Original Message -----
From: "David Love" <davidlovepianos@earthlink.net>
To: "Ron Nossaman" <RNossaman@cox.net>; "Pianotech" <pianotech@ptg.org>
Sent: July 25, 2003 1:08 PM
Subject: Re: soundboardinstal again


> ...BTW, what
> would be "dangerous" about the use of go bars this way--I think you
> mentioned that in a previous post.

Have you ever seen what happens to a soundboard when a gobar slips? In a
rib-to-soundboard press it is bad enough. I'd not want to be around to see
what happens when you knock one (stressed enough to be forcing half the
crown out of a board, remember!) off the top of a bridge. If you didn't end
up with a hole through the soundboard I'd think you'd at least have a
really big dent.

Del



This PTG archive page provided courtesy of Moy Piano Service, LLC