To what end would one use a cap on a cut-off bar? Why would this glue joint benefit from a cap and not the rest of the rim? Terry Farrell ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: <davidlovepianos@earthlink.net>; "Pianotech" <pianotech@ptg.org> Sent: Friday, July 25, 2003 12:50 PM Subject: Re: Screwing down the board: was Re: soundboardinstal again SNIP > > When the board is glued in, I normally don't use screws unless I have a cap > on top of where the cutoff bar is. > > Ron N > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC