Shank Lengths for Steinway L

[Keith Roberts]

Not that I know of.  It should be 5 1/8 inches from the center pin to the
center of the hammer. I hung a set of hammers on one of the three L's we've
had go through the shop this last year. Plus I regulated all three and I
didn't notice any diff.
Keith Roberts
----- Original Message -----
From: "Richard Brekne" <Richard.Brekne@grieg.uib.no>
To: "PTG" <pianotech@ptg.org>
Sent: Tuesday, June 10, 2003 6:51 AM
Subject: Shank Lengths for Steinway L


> Hi folks.
>
> Any of you folks out there with experience dealing with the L model...
> is there some  specification for shank lengths for this model that calls
> for different lengths for different sections ?
>
> Thanks
> RicB
>
> --
> Richard Brekne
> RPT, N.P.T.F.
> UiB, Bergen, Norway
> mailto:rbrekne@broadpark.no
> http://home.broadpark.no/~rbrekne/ricmain.html
> http://www.hf.uib.no/grieg/personer/cv_RB.html
>
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>