Yeah.. but... :) for the most part the rest of the piano has reasonably uniform shank lengths ... or what ? RicB antares@euronet.nl wrote: > According to me there are almost never definite shank lengths for > Steinway grands despite the general prescribed measure of 13,5 cm from > the center pin to the middle of the hammer mold/core. > Especially in the third section (from the left) there are numerous > possibilities and in the factory it is quite normal (!) to change the > complete third section after second voicing. (yes we can do that > because we earn enough money la di da) > > Antares, > The Netherlands > -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html http://www.hf.uib.no/grieg/personer/cv_RB.html
This PTG archive page provided courtesy of Moy Piano Service, LLC