This is a multi-part message in MIME format. ---------------------- multipart/mixed attachment Oops! Meant to send this along with the other one. Hit the send button too soon! (It's the dufus thingee again!) The one on the right is inter-changeable for either B's/E's or C's/F's. Hence the "lip" is on both sides of the "clamping plate. The holes, (in picture one), and grooves are to hold the key clamps in an advantageous position without slipping. A tip: slightly "Point", (grind), the tips of the clamp stem to position better and cut down on the "skewing" effect. Best Regards, Joe Garrett, RPT, (Oregon) Been There, Didn't Like It, So I'm Here To Stay! [G} ---------------------- multipart/mixed attachment A non-text attachment was scrubbed... Name: hphphp9.jpg Type: image/jpeg Size: 92287 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/d6/6f/f3/0e/hphphp9.jpg ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC