---------------------- multipart/alternative attachment BobDavis88@aol.com wroteTerry Farrell writes: > > We have used many Bolduc blocks, and like them. We used several sets > of 1/0 pins, and I decided that I don't like the feel in non-bushed > pianos, so we went back to 2/0. I drill .250 in one pass, and come out > about 120-130 inch pounds right after. I'm surprised Terry's are > coming out that tight. > Bob Davis Hi Bob. Im curious as to whether or not you are drilling by hand or using a mounted press... or what. Cheers RicB -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html http://www.hf.uib.no/grieg/personer/cv_RB.html ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/15/51/d5/10/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC